How to Replace Windshield Wipers

Many drivers may not realize it, but replacing windshield wipers is important for driver safety. Need help understanding how to replace windshield wipers? We have just the steps for you to follow. Our dealership also has a state-of-the-art service center that can replace windshield wipers for you as well.

What You Need

In order to change your windshield wipers, you need a screwdriver, tape measure, and needle-nose pliers. Without these, changing the wipers is almost impossible. Not sure what kind of wipers you need for your car model? Come see our service department experts, and we can assist you.

Wiper Replacements

Not all windshield wipers are made equally, but we have simplified steps on how to work with different kinds of windshield wipers.

If have a hook slot connector, then the work is basically done for you, as all you need to do is put the windshield wiper arm at a right angle. Take the flap and attach it to the wiper. You should be able to pull it out, and any problems require simple pliers. After that, you can put on the fresh wiper and slide it until you can hear it or feel it snap into place.

The pin type arm windshield wiper is similar to the hook slot connector, but there is a pin instead of a tab. Press down on the pin on the back of the blade, or you may need to pick the pin out with a screwdriver. After a wiggle or tug, the blade will come out and you can place another one in to match the pins.

The straight end connector is typically the most difficult to change because of its varying designs. Sometimes you can be lucky by using a screwdriver to detach the blade and lock in the new one by sliding it on the arm.

Bill Doraty Kia Service Center Can Help

Since changing a windshield wiper can sometimes be complex, come to our dealership. Our service center takes the hassle out of learning how to change your windshield wipers. Contact us online to book your appointment with us today!